山東電纜橋架:電纜橋架與支架如何連接?
電纜橋架及支架和引入或引出的金屬電纜導管必須接地或接零可靠,且必須符合下列規定:
Cable trays and brackets, as well as metal cable conduits introduced or led out, must be reliably grounded or grounded, and must comply with the following regulations:
1、金屬電纜橋架及其支架全長應不少于2處與接地或接零干線相連接。
1. The total length of the metal cable tray and its bracket should not be less than 2 points connected to the grounding or neutral main line.
2、非鍍鋅電纜橋架間連接板的兩端跨接銅芯接地線,接地線小允許截面積不小于4平方毫米。

2. The two ends of the connecting plate between non galvanized cable trays are crossed with copper core grounding wires, and the minimum allowable cross-sectional area of the grounding wire is not less than 4 square millimeters.
3、鍍鋅電纜橋架間連板的兩不跨接接地線,但連接板兩端不少于2個有防松螺帽或防松墊圈的連接固定螺栓。
3. The two non bridging grounding wires between galvanized cable trays shall be connected, but there shall be no less than two connection fixing bolts with anti loosening nuts or washers at both ends of the connecting plate.
以上就是有關:山東電纜橋架 的介紹,想了解更多的內容請點擊:http://www.zkhtkj.cn 我們將會全心全意為您提供滿分服務,歡迎您的來電!
The above is an introduction to Shandong cable tray. For more information, please click: http://www.zkhtkj.cn We will wholeheartedly provide you with full score service. Welcome to call us!
下一篇:濟南電纜橋架:防火橋架制作工藝材料及性能
相關文章 / Recommended news
- 濟南廠房福音!大跨距橋架破解3大痛點,加強筋加,安裝省一半錢
- 山東工程人警惕!橋架敷線踩這坑必返工,監理當場叫停,國標早有明確規定
- 濟南人避坑!橋架≠線槽,90%工程人都搞混,一字之差差千里
- 避坑指南!山東電纜橋架規格別瞎選,偏大浪費偏小隱患大,國標早就定好了
- 濟南人必看!鋁合金電纜橋架選對厚度,耐用又省心,90%的人選錯踩坑
- 山東人必看!電纜橋架不是“鐵架子”,藏著建筑用電的密碼,90%的人都不懂
- 800kg/m抗壓!濟南電纜橋架,破解3大工程痛點,工期省30%
- 3種類型+98%散熱!山東電纜橋架,選對不踩坑,布線效率翻倍
- 2類核心支架!濟南電纜橋架,抗震承重雙達標
- 別再混淆!山東電纜橋架vs線槽,6大核心區別一文分清
陽極氧化鋁合金橋架
托盤式電纜橋架
梯式電纜橋架
梯式不銹鋼電纜橋架
深灰色金屬防火電纜橋架


